A user-friendly, ergonomic and height adjustable changing table

Medi2 is a changing table for nurseries, kindergartens and other child care centers that would like an ergonomic, height adjustable and user-friendly nursing area. It is a changing table that makes nursing easier for the care workers. It has electrical height adjustment that is set using a control switch. When changing a child, you can lower the table to its minimum height where the child can climb onto the table themselves. Afterwards the child is on the table, the care worker can raise the nursing table to comfortable working height.

The care workers do not have to lift and carry the child onto the nursing table. In a job where there can be many lifts during a day, it is a benefit to the health and safety of the workers, if heavy lifting can be avoided.

At the same time, the children lie comfortably and safely on the changing table. The ergonomic design with the rounded edges and corners are soft and smooth. The care workers can remain confident that there are no sharp corners to hurt or scratch the children. The rounded design also makes the nursing table easier to clean as there are no dirt traps where bacteria can hide.


Electrical height adjustment improves health and safety

The height adjustable changing table has an elegant and discrete design, and it also has all the functions needed in a nursing table for a modern child care institution. Medi2 has a height adjustment range from 65-100 cm. This makes it possible for the children to crawl on the table without help from a care worker. You can also use a small step ladder next to the table if the youngest children need a little extra help to get onto the table.

The lifting unit is a little smaller than on the Maxi2 nursing table, but it runs at the same speed; 50mm/s. It only takes 8 seconds to go from the lowest to the highest position. The care workers can easily set the height from the control switch on the top of the lifting unit. Naturally, it is placed out of the children’s reach.


Modify the nursing table to your needs

It is possible to choose Medi2 with or without a washbasin. The model without a washbasin measures 90 x 80 cm and has a practical size for smaller changing rooms. It is also suitable for changing areas that already have a sink installed but where you would like a more modern and user-friendly changing room.

Medi2 with integrated washbasin is 130 cm wide and 80 cm wide at the end where the children lie and 60 cm wide at the end where the care worker typically stands. The front of the tabletop curves slightly inwards and this gives the carers a perfect working position where they can easily reach diapers, washcloths, waste bags, etc.

You can also use the baskets underneath the table if you need more storage space at hand. Keeping the necessary items within reach allows the care workers to get what they need for changing without taking their attention off the children.

It is also possible to combine a nursing table with a basket unit. It is a section with an open cabinet with basket shelves where the top plate can be a normal worktop or with a sink. The basket unit can be placed next to a changing table or in between two changing tables as a middle piece.

There is also an option to choose a touch-free mixer tap or a mixer tap with a pull-out spray to modify the nursing table to the specific needs of the individual child care center.

If the youngest children need extra help in getting onto the nursing table, you can place a small, sturdy step ladder by the table. The ladder is designed with large, non-slip steps which are safe and easy to use for the children.


A reliable and durable changing table

A nursing table should – of course – be user-friendly and ergonomic, but it also has to be safe. The risk of scratches and injuries must be at an absolute minimum. For the Medi2 you can mount side guards if you would like to make the table even safer. This way the there is a frame on the sides of the table, which prevents the children from rolling over the sides.

The height adjustment has a built-in safety stop. This brings the table to an immediate halt if the table encounters any resistance when lowered or raised. It is one of the essential details that make the table safe in use and guard the health of children and adults.

It also complies with the standard ”DS/EN 12221-1:2008 + A1 2013: Child use and care articles’ and this guarantees that the nursing table is tested and approved with regards to safety, reliability, and durability.

No matter if you need a height adjustable changing table for a nursery, a kindergarten or a other child care centers, the Medi model is a nursing table that is perfect for a modern child care center as it provides both children and adults the best and safest day.



Item no.: 50-50675

Wall mounted Incl. sink, monobloc tap, flexible plumbing kit and thread baskets WITHOUT safety stop

Table top in White size 130x80/60 cm. Washbasin right side.

Electrical height adjustment 65-100 cm.

Medi 2, with washbasin

Item no.: 50-50677

Wall mounted Incl. thread baskets WITHOUT safety stop

Table top in White size 90x80/60 cm. Washbasin right side.

Electrical height adjustment 65-100 cm.

Medi 2, without washbasin


Item no.: 50-50680

Mattresses, grey

Worktop 90 cm.

Dimension 88x70x4 cm.

ATTENTION! Fits item no.: 50-50677


Item no.: 50-50681

Mattresses, grey

Dimensions 80x75x4 cm.

ATTENTION! Fits item no.: 50-50675


Item no.: 50-25792

Mattresses, grey

90 x 75 x 3 cm.

Item no.: 50-25793

Mattresses, grey

Mål 90 x 70 x 3 cm.

Item no.: 50-25797

Mattresses, grey

80 x 75 x 3 cm.

Item no.: 50-50682

Side covers

82x105 cm. Mountede on wall/floor

Side covers mountede on wall/floor

Item no.: 50-50683

Side covers

61x105 cm. Mountede on wall/floor

Item no.: 50-50688

Side covers

76x240 cm. Mountede on side of tabletop

Not retrofit

Side covers mountede on side of tabletop

Item no.: 50-14684


Battery powered


Item no.: 50-50694


Mixer with pull-out spray

Item no.: 50-50702

Ladder white 2-step

White frame and steps.

Ladder white 2-step

Item no.: 50-50690


Extra control with cable for Maxi2 and Medi 2 WHIT safety stop


Item no.: 50-50698


Extra control with cable for Maxi2 and Medi 2 WHITOUT safety stop

Item no.: 50-50687

Support legs

For nursing tables with and without wash basin.

Support legs

Item no.: 50-50689

Adapter frame

Adapter frame for Nursing table Medi2

Distance from wall 20 mm

Adapter frame

Item no.: 50-50691

Safety Stop

Safety stop for Medi 2, 90 cm

Item no.: 50-50692

Safety Stop

Safety stop for Medi 2, 130 cm

Item no.: 50-50696

Basket unit with wash basin

The unit can be installed between nursing tables or at the end.

Basket unit with wash basin

Item no.: 50-50697

Basket unit without wash basin

The unit can be installed between nursing tables or at the end.


Basket unit without wash basin

Item no.: 50-50699

Side guard

Worktop 90 cm.

For mounting on the side of the nursing table.

Not retrofit.

Technical data

Medi2 technical data

Manufactured in accordance with the following standard: DS/EN 12221-1:2008 + A1 2013, Products for child care ? nursing tables forprivate use ? Part 1: Safety requirements
Lifting speed: 8 sek. for 400 mm migration = 50 mm/s
Material: Vacuum-shaped plastic. Aluminium. Coated steel. Stainless steel.
Functional dimensions: height adjustment 600-1000 mm
Max. load: 75 kg




3D - Revit